Most home and building wiring is concealed within wall and floor panels. An best electrician in Christchurch needs to be able to identify and correct several types of problems that might occur with wiring in walls and floors. When checking the wiring in your home, you need to take into account not only the obvious damages caused by a faulty wiring system but also the less obvious consequences of not checking to wire at all. Electricians are trained to look for signs that a circuit is not being protected properly.
3 Signs Your House Needs Rewiring Immediately
1. Flickering Lights
The first indication that something is wrong with the lights in your house is usually flicking lights. When the electricity in a house trip, it causes a small current to flow in all the lights. As time passes, the amount of current flowing in the lights will increase until the lights begin to flicker. When the lights flicker, this is a sure sign that the electricity has gone out. If the lights continue to flicker after the electricity has been restored, it is a good indication that the fault is in the wiring.
2. Frequently Tripping Circuit Breakers
If you regularly experience problems with the lights in your house, it is a good idea to call an electrician. An Electrical Contractors Adelaide wide can determine the sources of the problems and suggest a solution. A tripped circuit breaker could be the cause of frequent flaking. If the lights always flake when the breaker is tripped, it is a good idea to have the wiring checked. Check the circuits that connect your appliances and lights that are not connected to a circuit.
3. Power-points Overheating and Sparking
One of the most common problems with power-points is overheating. To avoid overheating, make sure the power-points are set to the correct temperature. To check the correct temperature, place a small object such as a pen tip on the power-point. If the object is warm to the touch, the power-point is too hot. Likewise, if the object becomes cold to the touch, the power-point is too cold. If you notice that the temperature of the power-points is different from the room temperature, it is time to replace the panels.
How do electricians inspect your home’s wiring?
Depending on the type of work required, an electrician may be able to perform some electrical repairs without lifting a finger. These are known as “manual tasks.” However, most electrical work requires the use of a screwdriver, saw, or another tool to perform the task. The following are common electrical repairs that a skilled electrician can perform:
- Electrical connections – The connections between two or more appliances or devices. This includes the connection between an appliance and its receptacle, between a light and a circuit-board receptacle, and between a light and a light dimmer.
- Accessories – Wiring such as receptacles, switches, and lamps that are not directly connected to other parts of the circuit.
Benefits of Have Electricians Check Wiring in Your Home
When you have proper electrical connections in place, you will have a better chance of:
- Sustaining electricity – Being able to operate appliances and devices when the electricity is on.
- Keeping your house safe – Ensuring that there are no electricity-related fires or damages in your home.
- Safety – On several levels, faulty wiring, inappropriate components, incorrect installation procedures, and DIY work can compromise safety. A skilled inspector can detect any of these problems and advise you on how to make your house secure.
If you have not checked your wiring in a while, it is time to get back to work. It is also a good idea to have an electrician check the wiring in your home if: You notice frequent tripping of circuit breakers. You frequently experience electricity-related fires. Your lights are not performing as expected. If you have any questions or concerns about your electrical systems, contact Electrical Contractors Adelaide wide for help!
